Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air Filter Replacement for Audi A6

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

For proper engine operation of the Audi A6, replace the air filter at the intervals specified in the maintenance schedule. To do this, open the hood and locate the filter box on the passenger side, next to the wheel well.

Pry off the retaining clips to remove the cover and disconnect the outlet hose, then take out the old cylindrical filter element. By covering the outlet with a rag, clean the box with a blast of air. Now, install the new filter, ensuring correct positioning, close the cover, and reconnect the hose.

Operation complete.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Audi A6 C8
Where to Find the Fuse Box of the Audi A6 C8
Audi A6 (2018-2026 / MK 5, C8) To locate the fuse box containing all the various fuses in your Audi A6 C8, follow the steps described in this guide. First, ensure the vehicle is co…
How to Program the Remote for Door Unlocking on Audi A6 C5
How to Program the Remote for Door Unlocking on Audi A6 C5
Audi A6 (1997-2004 / MK 2, C5) In this video tutorial, you will learn how to program the remote for unlocking and locking the doors on the Audi A6 C5, as well as the Audi A4 B6. Fi…
Fuel Pump Replacement on Audi A6
Fuel Pump Replacement on Audi A6
Audi A6 (2004-2012 / C6, MK 3) How do you remove the fuel pump on an Audi A6? First, remove the access covers for the pump: either the rear seat cushions or the cover panel. Once a…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos