Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Fuel pump replacement on Audi A6

Audi A6 - Video tutorial

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Fuel pump
Operation: Fuel pump replacement on Audi A6

How do you disassemble the fuel pump on an Audi A6? To begin with, we need to remove the pump access covers: the rear seats or the cover panel. Once any cover has been removed, let's unscrew the screws of the tank cover cap. We cover the surface with absorbent paper to stop liquid leaks. Disconnect the power supply terminals and the liquid circulation tubes, unscrew the plastic nut. Finally we extract the fuel pump from its seat with attached pieces. We replace the fuel pump with a new one of the same type.


Posted on 11 March 2024 by ScegliAuto

    Frequently Asked Questions

    • A6 1997-2004 - How do you remove the fuel pump on a 2003 Audi A6? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos