Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How do you replace the Audi A6 water pump?

Audi A6 - Video tutorial

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Pump
Operation: How do you replace the Audi A6 water pump?

To be able to replace the Audi A6 water pump, you need to open the hood, in order to have access to the components inside the engine compartment. It will be necessary to remove the plastic cover of the upper part of the engine block and the radiator, so that the latter can be removed from its housing by unscrewing the screws and disconnecting the connectors. When the radiator has been removed, you will have access to the front of the engine, where the pulleys, belt and associated water pump are located: reducing the tension on the belt will allow access to the water pump, which will need to be removed from its housing by unscrewing the screws that fix it. In this way it will be possible to insert the new spare part and assemble all the previously removed components.


Posted on 20 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos