Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Radiator and Front Bumper

Model: Audi A6 MK 2, C5 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Radiator

See other generations:
Video tutorial

Using a ratchet wrench, start removing the screws from the engine cover, beginning at the fender. The anchor points are distributed around the bumper and underneath the vehicle.

Remove the radiator feed hose and use a wrench to stop the coolant from flowing. Disconnect the electrical connectors for the cooling fans and the remaining hoses.

Pull the plastic grilles from the bumper to access the retaining screws. Move the bumper away and begin freeing the front end by unscrewing the screws that secure it to the body.

Remove the coolant reservoir. A service tool allows you to move the entire front end without having to completely disassemble it. With the front end in this position, you can now access the radiator for removal.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper Grille on Audi A6
How to Remove the Front Bumper Grille on Audi A6
Audi A6 (1997-2004 / MK 2, C5) Let's see how to remove the grille from the front bumper on an Audi A6. Prepare to take off the plastic grille: use a screwdriver to disengage the cl…
Removing the Front Bumper on the Audi A6
Removing the Front Bumper on the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today, discover the instructions to remove and replace the front bumper on the Audi A6 by following these simple steps. First, open the hood of the v…
Removing the Front Bumper of the Audi A6 C7
Removing the Front Bumper of the Audi A6 C7
Audi A6 (2011-2018 / C7, MK 4) To remove the front bumper of the Audi A6, start by unscrewing the eight screws on the lower edge, under the front trim, using a Torx screwdriver. Ne…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos