Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Spoiler Control Module

Model: Audi A7 MK 1 - Years 2010-2017
Part: Body

The rear spoiler mounted on the hood is controlled by a specific module located in the trunk, behind the right side trim (when looking into the hood): if the warning light on the instrument cluster illuminates and the spoiler does not respond to commands, it is likely a fault with the module; to replace it, open the trunk, remove the side trim, access the module, and disconnect the connector to remove it from its housing; connect the new module to the connector, perform a functionality check with the appropriate button, and complete the installation.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 1 (2004-2013 / E87, E82, E81, MK 1) First, remove the original spoiler that is glued to the bonnet: it is recommended to use a strong cotton thread (to cut the double-sided tape) and a …
Ford Kuga (2012-2019 / MK 2, C520) In this guide, we will see the procedure for installing the additional rear spoiler on the Ford Kuga, following the instructions below. First of all,…
Mazda Mx 5 (1989-1997 / MK 1) Lift the vehicle on suitable car stands or a lift to facilitate the installation process. The spoiler kit includes the securing screws: you will need…

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos