Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble and replace the instrument panel of the Audi 80

Model: Audi 80 B4 - Years 1991-1995
Part: Instrument cluster

In this short guide, we will see the instructions that will allow us to disassemble and replace the instrument panel of the Audi 80. First of all, we get on board the car and start removing the plastic partition around the instrument panel; then we unscrew the fixing screws of the panel, disconnecting the electrical wiring behind the instrument panel to remove it, as shown in the video. At this point, we replace and install the new instrument panel, making the connection; we reassemble the instrument panel by fixing it with the screws, finally verifying its correct operation!

Posted on 31 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi 80 (1986-1991 / B3) In this new guide for all Audi 80 B3 owners, discover where the fuse box containing the various fuses of the car is located. First, switch off the ve…
Audi 80 (1986-1991 / B3) If you are looking for a simple guide to help you locate the fuse box inside your Audi 80 B3, just follow the instructions below and put them into pr…
Audi 80 (1986-1991 / B3) The fuses of the Audi 80 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it will be possible to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos