Do it yourself
Frequently asked questions about cars and motorcycles

Installation of Front and Rear Bumper Spoilers

Model: Mazda Mx 5 MK 1 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Body

See other generations:
Video tutorial

Lift the vehicle on suitable car stands or a lift to facilitate the installation process. The spoiler kit includes the securing screws: you will need a screwdriver, a drill bit, and masking tape.

Once the spoiler is aligned with the bottom edge of the bumper, centring it correctly, secure it in position with masking tape during installation. Then, drill the securing holes with the bit and apply the securing screws.

Repeat the same operation on the rear bumper.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Mazda Mx 5 (1989-1997 / MK 1) Using the appropriate tools that fit into the slots above and below the car radio to release the retaining springs, remove the complete console and d…
Mazda Mx 5 (1989-1997 / MK 1) Dismantling the rear bumper of the Mazda MX5 NB is a straightforward operation, but you must first remove a considerable number of screws; the attach…
Mazda Mx 5 (2005-2015 / NC, MK 3) The following guide shows the installation of devices such as iPhone, iPod, iPad, and MP3 to your car radio. One solution for this operation is to in…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos