Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight on an Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Headlight

Today, you will learn in this brief and simple guide how to remove and replace the headlight on an Audi A4. First, open the hood of the vehicle and start unscrewing the mounting screws located at the top of the headlight assembly; then disconnect the electrical connector for the bulbs to remove it, as shown in the video. At this point, replace the bulbs, and if necessary, replace the entire headlight assembly; reposition it to install it again, reconnecting the electrical connections for the lights by applying the reverse procedure!

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of an Audi A4
How to Remove the Front Headlight of an Audi A4
Audi A4 (2004-2008 / B7) Before you can begin, open the hood of your Audi A4. Start by removing the screws that secure the front headlight to the vehicle using a Torx screwdr…
How to Remove the Front Headlight of an Audi A4?
How to Remove the Front Headlight of an Audi A4?
Audi A4 (2004-2008 / B7) Before starting, open the hood of your Audi A4. Begin by removing the screws that secure the front headlight to the vehicle using a Torx screwdriver.…
Remove the Front Headlight on Audi A4
Remove the Front Headlight on Audi A4
Audi A4 (2000-2004 / B6) Removing the front headlight on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headlight…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos