Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on an Audi A5?

Model: Audi A5 8T8, 8T, 8T3, 8F - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear lights on an Audi A5, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety.

Start by opening the boot lid, then unclip the plastic panel located on the inner edge of the light to be removed. Next, unscrew the two fastening bolts with a Torx spanner, grasp the light unit and pull it towards you, unclipping it from the bodywork.

Finally, disconnect the power connector and fit the replacement by following the reverse procedure.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Replacing the Rear Lights on an Audi A5
Replacing the Rear Lights on an Audi A5
Audi A5 (2018-2025 / 8W6) By following these simple instructions, you will see how to remove and replace the rear lights on an Audi A5, along with their bulbs. First, open the…
Where Are the Fuses Located on the Audi A5?
Where Are the Fuses Located on the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) The fuses on the Audi A5 are located inside the designated fuse boxes installed in the vehicle: in this type of vehicle, you will find two boxes for …
Where are the Fuses Located on the Audi A5?
Where are the Fuses Located on the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) The fuses on the Audi A5 are located inside the designated fuse boxes present in the vehicle: in this type of car, you can find three boxes for holdi…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos