Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Scratches from the Bodywork of the Audi A5

Model: Audi A5 8T8, 8T, 8T3, 8F - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Body

See other generations:
Video tutorial

In today's video, follow the steps to remove light scratches from the bodywork of the Audi A5, following the instructions below. First, clean the affected area thoroughly using a cloth and a degreaser; then use a polish for bodywork polishing, followed by a wash with wax to optimise the finish of the bodywork.

If scratches are still present, you will need to proceed with repainting the bodywork, first using a sander to remove the old paint.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

Repairing Scratches and Dents on the Bodywork
Repairing Scratches and Dents on the Bodywork
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Small scratches on the bodywork are relatively easy to repair. Start by gently sanding the damaged area with 150-grit sandpaper to make the surface s…
How to Change the Appearance of Alloy Wheels with Vinyl Wrap
How to Change the Appearance of Alloy Wheels with Vinyl Wrap
Audi A5 (2018-2025 / 8W6) In this video, you can see how to change the appearance of the alloy wheels on your vehicle (in this case, it is an Audi RS5, but naturally, you can …
How to Replace the Front Bumper on an Audi A5
How to Replace the Front Bumper on an Audi A5
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Today, we will go through the steps necessary to remove and replace the front bumper on an Audi A5. First, open the bonnet of the vehicle and start u…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos