Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B7
- Years 2004-2008 In order to replace the valve cover gasket on the Audi A4, you first need to remove the plastic cover on the top of the engine block. Then, you can disconnect the injectors and loosen their mounting screws so that they can be removed from their housing. Now, all the screws that hold the valve cover in place can be unscrewed and the cover itself can be removed. The old gasket can then be removed from its lower part and replaced with a new one. After installation, the cover can be reattached to the top of the engine block by reassembling all the previously removed parts.
Posted on 29 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |