Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in an Audi A6?

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin filter in an Audi A6 is an extremely simple and quick operation. Start by sitting in the passenger seat.

Then, remove the two plastic screws located under the glove compartment and take off the cover panel. Next, locate the long rectangular door on your left, unlock the clip, and pull out the old filter.

At this point, remove any dirt inside the housing and insert the new filter in the correct direction.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on an Audi A6
How to Replace the Cabin Air Filter on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) How do you replace the cabin air filter on an Audi A6? Let's see in this video how to remove the filter located in its dedicated housing. Unscrew the…
How to Remove the Cabin Air Filter in an Audi A6
How to Remove the Cabin Air Filter in an Audi A6
Audi A6 (2004-2012 / C6, MK 3) How to remove the cabin air filter in an Audi A6? You can find the cabin filter in the lower right of the glove compartment. Use a plastic trim tool …
Replacing the Cabin Air Filter in Audi A6 Avant
Replacing the Cabin Air Filter in Audi A6 Avant
Audi A6 (2004-2012 / C6, MK 3) To replace the cabin air filter in the Audi A6, start by placing the vehicle on a lift or on a flat surface to work safely. After locating the filter…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos