Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Air Filter in Audi A6 Avant

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Cabin air filter

To replace the cabin air filter in the Audi A6, start by placing the vehicle on a lift or on a flat surface to work safely. After locating the filter housing (which is inside the cabin, behind the glove compartment), use the appropriate wrench to remove the five bolts found on the horizontal panel under the glove compartment, and then those near the top edge of the glove compartment. Once done, remove the entire glove compartment assembly (after disconnecting the electrical connector). The cabin air filter housing is located to the right of the space created by removing the filter itself. Remove the cover and then the old filter. Insert the new cabin air filter and reassemble everything!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A6 (2004-2012 / MK 3, C6) How to remove the cabin air filter in an Audi A6? You can find the cabin filter in the lower right of the glove compartment. Use a plastic trim tool …
Audi A6 (2011-2018 / C7, MK 4) Let's see how to replace the engine air filter on an Audi A6. Open the car door, pull up the hood release lever located at the bottom left of the das…
Audi A6 (2011-2018 / C7, MK 4) In this new mini guide dedicated to all of you who own a 2016 Audi A6, we will discover the various steps to follow in order to correctly replace the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos