Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Automatic tailgate opening for the Audi A3

Model: Audi A3 8Y, MK 4 - Years 2020-2026
Part: Trunk lock

If the Audi A3 is not equipped with the convenient remote tailgate opening, you can remedy this with an easy intervention. Obtain pneumatic struts with spiral springs at the base. Open the tailgate and, using a small screwdriver, remove the metal lock from the mounting heads of one of the two standard struts, disconnect them from their seats, being careful as the tailgate, if not properly supported, can drop slightly. Replace the strut with the one equipped with springs and repeat the operation on the other side. Once both new struts are installed, when you activate the tailgate opening from the remote, it will open automatically, while the closing remains manual.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Automatic opening of the rear tailgate of the Audi A3 MK3
Automatic opening of the rear tailgate of the Audi A3 MK3
Audi A3 (2012-2019 / 8V, MK 3) Having the automatic opening of the rear hatch of the Audi A3 is very convenient when our hands are busy with luggage. If our model does not have thi…
How to open the fuel flap if it is stuck in the Audi A3?
How to open the fuel flap if it is stuck in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3, the fuel flap may get stuck due to a fault in the actuator or central locking system. In this case, you can manually open it by follo…
What to Do If the Boot of the Audi A3 Won't Open?
What to Do If the Boot of the Audi A3 Won't Open?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3, the boot may get stuck, for example, due to a fault with the corresponding actuator. In this case, it is still possible to perform an…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos