Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Light on the Cup Holder of the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Checks and maintenance

To carry out this purely aesthetic job, first, you need to remove the centre tunnel. Start by taking off the gear knob, then, using plastic spatulas, remove the centre tunnel: underneath, there are two connectors that you will need to disconnect. Tilt the gear knob to remove the tunnel. Remember to do everything with the ignition off. Once you have the tunnel in hand, turn it over and you will see that there are 10 points to unglue to remove the cup holder. This task requires precision and patience, but it can be done. Remove the spacer, in place of which you will install your LED. This item can be found on AliExpress with the code 344316_486351 and costs £19.88, already complete with wiring. Re-glue the cup holder with PVA glue and hold it under pressure for a few hours to ensure it adheres well. You can choose the colour of the light by connecting the two wires. Now, reassemble the tunnel and replace the gear knob. You are all set.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light on the Audi A3
How to replace the third brake light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this new mini guide of ours, we will help you to carry out the replacement of the third brake light of your Audi A3 quickly and correctly. First o…
How to Install LED Lights in the Front Door of the Audi A3
How to Install LED Lights in the Front Door of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) These new LED lights make the car even more attractive and modern. They can project the model name directly onto the surface below for a visually str…
How to change the light in the luggage compartment of an Audi A3 8P
How to change the light in the luggage compartment of an Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this video, we will see how to change the bulb inside the trunk of an Audi A3 8P, with a white LED T10 canbus. The fact that it is canbus will pre…

    Frequently Asked Questions

    • A3 2012-2019 - How to remove the armrest of an Audi A3? Read answer

How to Open the Fuel Cap of the Volkswagen Jetta

When you need to refuel this vehicle, first open the fuel filler flap. Follow these simple instructions, and you can also watch the video for more details. First, unlock the central locking to open the flaps. Then, press the fuel cap with your hand to unlock it and open it. Underneath, you will find the fuel cap, which you need to unscrew counterclockwise. At this point, you can proceed to refuel.

Watch the video!


by ScegliAuto

More videos