Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the oil indicator light on the 2017 Audi Q3.

Model: Audi Q3 8U - Years 2011-2018
Part: Service warning light

In this new mini guide dedicated to your Audi Q3 first generation (year 2017), we will discover how to manually reset the engine oil warning light. First, enter the car and start the instrument panel. Then, press the "Car" button and scroll through the menu using the knob. At this point, locate and select the "Servicing & Checks" option. Scroll down again and this time select "Service intervals". Finally, enter "Reset oil change interval" and confirm the manual reset of the oil warning light. Wait a few moments and the procedure is successfully completed.

Posted on 3 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2016 Audi Q3
How to Reset the Service Light on the 2016 Audi Q3
Audi Q3 (2011-2018 / 8U) Today, you will learn how to reset the service light related to the oil change and maintenance on a 2016 Audi Q3 vehicle. Press the button on the cen…
To reset the service light of the Audi Q3 2014.
To reset the service light of the Audi Q3 2014.
Audi Q3 (2011-2018 / 8U) To correctly complete the manual reset of the service light on your 2014 Audi Q3, simply follow these simple steps. The entire procedure takes just a…
To reset the TPMS (Tire Pressure Monitoring System) warning light on the Audi Q3.
To reset the TPMS (Tire Pressure Monitoring System) warning light on the Audi Q3.
Audi Q3 (2011-2018 / 8U) To reset the TPMS warning light on the dashboard of your Audi Q3, simply follow the steps described in the following guide. First, turn on the igniti…

Other guides you may be interested in

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos