Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on the Audi A3 is a straightforward operation that can be done independently. Begin by entering the vehicle and turning on the ignition.

Continue by pressing the right knob on the speedometer for two seconds. The display will show the service message along with the mileage until the next interval.

At this point, hold the button for 10 seconds and turn off the car, then restart it after a few moments and press the same knob for another 10 seconds. This will reset the light.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on a 2016 Audi A3
How to reset the service light on a 2016 Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the 2016 Audi A3 on your own. To reset the warning light, we turn on the instrument panel and the onboard computer…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the service light on an Audi A3 vehicle independently. The reset should be done only after performing the operatio…
How to Reset the Service Light on the Audi A3
How to Reset the Service Light on the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Resetting the service light on the 2010 Audi A3 model 8P is a very simple operation to do on your own. The steps to follow are: - turn on the vehicle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos