Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How do you replace the thermostat of the Audi A6?

Audi A6 - Video tutorial

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Thermostat
Operation: How do you replace the thermostat of the Audi A6?

In order to replace the thermostat of the Audi A6, you need to open the hood so that you have access to the components located inside the engine compartment: here you can locate the plastic cover on the top of the engine block, which needs to be removed. Underneath it, you can find the tube for the passage of the coolant on the right side, which needs to be disconnected by removing the corresponding ring: after removal, it will be possible to remove the thermostat positioned below it, replacing it with a new one and reassembling all the previously removed parts.


Posted on 14 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos