Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Cooling water thermostat replacement.

Audi A6 - Video tutorial

Model: Audi A6 C4, MK 1 - Years 1994-1997
Part: Thermostat
Operation: Cooling water thermostat replacement.

Open the bonnet and disconnect the negative pole of the battery to work safely. Unscrew the engine cover screws and remove it to gain access to the inside. Open the radiator expansion tank cap and place a coolant drip pan under the car. Locate the thermostat and disconnect the electrical wire connector. Remove the various water pipes to access the thermostat and proceed with its removal. The thermostat is located on an aluminum sleeve which must be removed and cleaned. Install the new thermostat and proceed with the assembly of the various elements previously removed. Reconnect the connector and top up the coolant.


Posted on 7 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos