Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Tt
    4. : Removing the front bumper grille

Audi Tt - Video tutorial

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Grille
Operation: Removing the front bumper grille

In order to remove the grille that houses the manufacturer's emblem, the front bumper must be removed since the fixing tabs are located at the rear; therefore open the front hood and remove the pressure clips that secure the plastic cover of the grille; remove the fixing pins of the bumper along the lower strip, those inside the wheel arches which must then be moved and those on the bonnet bumper grille; remove the bumper by disconnecting the headlight washer system and unhook the tabs that secure the grille to the bumper itself.


Posted on 7 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos