Do it yourself
Frequently asked questions about cars and motorcycles

Removing Brake Pads from a Car

Model: Audi A6 C4, MK 1 - Years: 1994, 1995, 1996, 1997
Part: Brake pads

See other generations:
Video tutorial

The efficiency of your car's braking system is crucial for ensuring the safety of the driver and passengers. It is advisable to purchase original pads to avoid reduced braking efficiency.

This guide shows how to replace them. Lift the car with a jack, then unscrew the wheel bolts and the hex bolts that secure the caliper to the hub. You can then slide the caliper off the rotor and, applying pressure, extract the worn pads.

It is good practice to use a blast of compressed air to remove dust residue.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Audi A6 (1997-2004 / MK 2, C5) A mechanic demonstrates how to remove and replace the brake discs and pads. He shows the vehicle already lifted with the wheels removed. In this vid…
Audi A6 (1997-2004 / MK 2, C5) Lift the vehicle on a lift and remove the wheel corresponding to the repair area. Remove the mounting pins of the brake caliper located at the rear a…
Audi A6 (2004-2012 / C6, MK 3) Here are practical tips for replacing the brake pads. Lift the car and remove the wheel covers, then the bolts, until the wheel is off. Disconnect th…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos