Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Grille

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Grille

See other generations:
Video tutorial

The front grille that displays the manufacturer's emblem is integrated into the hood and not the bumper: removing it is therefore extremely simple and does not require the removal of any other body components; start by opening the hood and locating the plastic tabs along the edge of the grille that secure it to the hood; gently press on the tabs with the tip of a screwdriver to release them and gradually pull the grille away from its housing to complete the removal (if the outside temperature is very low, it is recommended to slightly warm the tabs with a hairdryer to avoid breaking them).


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Front Bumper Grille on an Audi A4
How to Remove and Replace the Front Bumper Grille on an Audi A4
Audi A4 (2000-2004 / B6) Today's instructions will guide you through the process of removing and replacing the front bumper grille on an Audi A4 in simple steps. First, open …
How to Replace the Front Bumper Grille on an Audi A4
How to Replace the Front Bumper Grille on an Audi A4
Audi A4 (2007-2016 / B8) This guide explains how to remove and replace the front bumper grille on an Audi A4, following the instructions below. First, open the hood and start…
How to Replace the Front Grille on an Audi A4?
How to Replace the Front Grille on an Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, you will see how to replace the front grille on an Audi A4. This operation is very simple but requires removing the bumper. First, …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos