Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : Removing and replacing the front window lift motor.

Audi A4 - Video tutorial

Model: Audi A4 B6 - Years 2000-2004
Part: Window lift button
Operation: Removing and replacing the front window lift motor.

Remove, using a plasticized lever, the silver finish on the top of the door. Unscrew the four screws. Remove the small cover on the handle and unscrew the two screws underneath. Finally, unscrew the screw under the panel and, by levering it, remove the panel itself. Pull out and up. Disconnect the lock cable and the various power cables. Electric. At this point we can remove the window lifter motor. We unscrew the bolts that secure it using the appropriate key. Using a small screwdriver, we separate the motor from the electronic board and, now, we can replace the old window motor with the new one. The maintenance operation carried out in the images was carried out on an Audi A4.


Posted on 9 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos