Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q2
    4. : How to remove the door panel of an Audi Q2.

Audi Q2 - Video tutorial

Model: Audi Q2 MK 1 - Years 2016-2024
Part: Door panel
Operation: How to remove the door panel of an Audi Q2.

Removing the door panel of an Audi Q2 is a very simple operation to perform independently. The first step to remove the panel is to open the door in question and remove the metal part on the handle using a plastic lever. The second step is to remove the Torx screws that secure the panel, there are two on the handle and two on the lower part of the panel. The third step is to remove the panel using the plastic lever. Once the panel is removed, disconnect the blue and white connectors from the handle.


Posted on 21 January 2024 by ScegliAuto



How do you reset the Service light on the Audi Q2?
Audi Q2 (2016-2024 / MK 1) In order to reset the Service light of the Audi Q2, you need to go inflate the tires until they are brought back to their optimal pressure value: thi
Where is the fuse box of the Audi Q2 located?
Audi Q2 (2016-2024 / MK 1) In order to locate the fuse box inside your Audi Q2 on your own, all you need to do is follow the steps described in our new guide. First of all, tur
How to replace the battery of the key remote control of the Audi Q2.
Audi Q2 (2016-2024 / MK 1) Today we are going to discover the instructions on how to disassemble and replace the battery of the Audi Q2 key remote. First, we take our remote co

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos