Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Door Panel

Model: Audi A4 B6 - Years 2000-2004
Part: Door trim panel

This guide explains how to remove the door panel of your car. This panel is not difficult to disassemble. Once removed, you will be able to access the speaker enclosure, the speakers, install or repair an alarm system, change the automatic locks of your car door, work on the door release lever, and operate on the terminals of the window regulator module. To replace or repair the door handle or parts of the power window regulator, you must also remove the door panel. First, locate the screws on the panel and detach the trim piece. To do this, pry on the right side, and once you hear a click, you can pull it off as it is released.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the trunk on Audi A4 with low battery
How to open the trunk on Audi A4 with low battery
Audi A4 (2007-2016 / B8) How to open the trunk of your Audi A4 if the key battery is flat or broken? Let's see how the tailgate opens. We open the rear door of the car and we…
How to Replace Your Car's Door Panel
How to Replace Your Car's Door Panel
Audi A4 (2000-2004 / B6) With a bit of dedication and passion, you can remove your car's door panel completely on your own. Disassembly is not difficult at all. Once removed,…
Removing the door panel on Audi A4
Removing the door panel on Audi A4
Audi A4 (2014-2024 / B9) How to remove the door panel? Let's see the disassembly of the door panel of an Audi A4. We remove the satin aluminum molding placed in the upper par…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos