Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights of the Audi Q5.

Model: Audi Q5 8R, MK 1 - Years 2008-2017
Part: Tail light bulb

Today's information will show us how to disassemble and replace the bulbs of the rear bumper taillight of the Audi Q5. First, let's move to the rear of the vehicle and start by removing the small plastic cap located under the taillight. Then, unscrew the screw found inside to remove it, disconnecting the electrical connector of the lights, as shown in the video. At this point, remove and replace the bulb with the new one, having the same connector. Secure the taillight again to complete the replacement operation!

Posted on 26 January 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the tail lights on the Audi Q5?
How to remove the tail lights on the Audi Q5?
Audi Q5 (2008-2017 / 8R, MK 1) In this tutorial, we will see how to disassemble the rear lights on an Audi Q5, a process that is extremely simple and quick. First of all, let's mak…
How to replace the rear headlight bulb of the Audi Q5
How to replace the rear headlight bulb of the Audi Q5
Audi Q5 (2008-2017 / 8R, MK 1) Replacing the rear headlight bulb of the Audi Q5 is a fairly simple and quick operation to perform. In case of bulb replacement, you will need to ope…
How do you remove the rear bumper of the Audi Q5?
How do you remove the rear bumper of the Audi Q5?
Audi Q5 (2008-2017 / 8R, MK 1) To be able to replace the rear bumper on the Audi Q5, you must first remove the taillights of the parking lights, which are located in the upper part…

Removing the Drive Shaft on a Fiat Panda

Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the securing bolts on either side of the drive shaft (remove the bolts around the plates) where it is situated. Once the part is removed, take it out of the vehicle (replace it with a new drive shaft). Finally, refit the new drive shaft (connect it on both sides) and tighten the appropriate bolts. Lower the car and test its proper functioning.

Watch the video!


by ScegliAuto

More videos