Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of an Audi Q5

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

In this guide, learn how to replace the rear light of an Audi Q5. First, open the compartment under the light in the rear bumper, remove the cover, and use a screwdriver to remove the screw inside. Once the light is free from any constraints, disconnect it from the bumper by unplugging the electrical connectors.

Finally, install the new light: connect the electrical connector, insert the light into the bumper (after installing the bulbs), and tighten the retaining screw. Close the inspection cover of the bumper.

Finally, test the lights to ensure they are functioning correctly.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How do you change the reverse light bulb of an Audi Q5?
How do you change the reverse light bulb of an Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) In this video, we see how to change the reverse light bulb of an Audi Q5: under the rear headlight, in the bumper, we have a cap that we open. From h…
How to Remove the Lower Rear Headlight of an Audi Q5?
How to Remove the Lower Rear Headlight of an Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) Before starting, exit the cabin of your Audi Q5 and head to the rear of the vehicle. Using a thin but sturdy tool and leveraging it, begin by prying …
How to Remove the Lower Rear Headlight of an Audi Q5
How to Remove the Lower Rear Headlight of an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Before you can start, exit the cabin of your Audi Q5 and head to the rear of the vehicle. Using a thin but sturdy tool and leveraging it, begin by pr…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos