Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lower Rear Headlight of an Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Tail light

Before you can start, exit the cabin of your Audi Q5 and head to the rear of the vehicle. Using a thin but sturdy tool and leveraging it, begin by prying off and removing the cover of the screw that secures the lower rear headlight, then unscrew and remove the screw itself. By doing this, you will have freed the lower rear headlight. Proceed to extract the headlight from its housing, then disconnect the electrical connector. Once you complete this last step, you will have successfully finished the removal.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Lower Rear Headlight of an Audi Q5?
How to Remove the Lower Rear Headlight of an Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) Before starting, exit the cabin of your Audi Q5 and head to the rear of the vehicle. Using a thin but sturdy tool and leveraging it, begin by prying …
How to replace the rear headlight bulb of the Audi Q5
How to replace the rear headlight bulb of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Replacing the rear headlight bulb of the Audi Q5 is a fairly simple and quick operation to perform. In case of bulb replacement, you will need to ope…
How to Replace the Rear Light of an Audi Q5
How to Replace the Rear Light of an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, learn how to replace the rear light of an Audi Q5. First, open the compartment under the light in the rear bumper, remove the cover, a…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos