Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Tail light bulb

Replacing the rear headlight bulb of the Audi Q5 is a fairly simple and quick operation to perform. In case of bulb replacement, you will need to open the trunk of the car and remove the lower cover of the headlight in order to access the inside of the headlight. To remove the cover, use a screwdriver or a plastic lever. Once you have access to the headlights, disconnect the connector from the bulb and proceed with the replacement by inserting a new bulb. Connect the connector to the new bulb and insert the headlight into its housing. Close the lower part of the headlight.

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Bumper Light Bulb on an Audi Q5
Replacing the Rear Bumper Light Bulb on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) In this brief guide, you will find instructions to remove and replace the light bulb of the rear bumper light on an Audi Q5. First, move to the back …
Replacement of the rear fog light bulb of the Audi Q5
Replacement of the rear fog light bulb of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Below we will see the instructions that will allow us to disassemble and replace the rear bumper light bulb (fog light) of the Audi Q5. First of all,…
How to Replace the Rear Headlight Bulbs on an Audi Q5
How to Replace the Rear Headlight Bulbs on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Today’s information will show you how to disassemble and replace the bulbs in the rear light of the Audi Q5. First, move to the back of the vehicle a…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos