Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator Hoses on an Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017

Today's information will show you how to remove and replace the heating radiator hoses for the cabin and air conditioning on an Audi Q5. First, lift the vehicle and start draining the coolant. Next, remove the air filter housing and disconnect the radiator hoses by releasing the metal clip, as shown in the video. At this point, remove and replace the coolant hoses with new ones, as well as the original ones. Apply the reverse procedure for reassembly!

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator Fan on an Audi Q5
How to Replace the Radiator Fan on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Before you can start, open the hood of your Audi Q5. Begin by removing the bumper and the front headlights by unscrewing the mounting screws and rele…
How do you replace the radiator fan of the Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) In order to replace the radiator fan of the Audi Q5, you need to open the hood so that you can access the components located inside the engine compar…
Disassembling Heater Fan on Audi Q5
Disassembling Heater Fan on Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In today's tutorial video, you will see how to remove and replace the cabin heater fan on a first-generation Audi Q5, facelift version. First, access…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos