Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : How to replace the battery of the Audi Q5 key remote control.

Audi Q5 - Video tutorial

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Battery
Operation: How to replace the battery of the Audi Q5 key remote control.

Today's guide will briefly explain how to disassemble and replace the battery of the Audi Q5 key remote in simple and quick steps. First, we take our remote control and start pulling and extracting the physical key from inside it; then we remove the battery tray, as shown in the video. At this point, we remove and replace the battery with a new one of the correct type and with the same code; we insert it correctly into the tray and then fix everything onto the remote control, finally inserting the physical key to complete the process!


Posted on 29 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Q5 2008-2017 - Where is the Audi Q5 Mk1 battery located? Read Answer
    • Q5 2017-2025 - Where is the Audi Q5 battery located? Read Answer
    • Q5 2017-2025 - Where is the battery in the Audi Q5? Read Answer
    • Q5 2008-2017 - Where is the battery in the Audi Q5? Read Answer
    • Q5 2017-2025 - Where is the battery located in the Audi Q5? Read Answer
    • Q5 2017-2025 - Why does the engine of the Audi Q5 stop starting after replacing the battery? Read Answer
    • Q5 2008-2017 - Where is the battery in the Audi Q5? Read Answer
    • Q5 2008-2017 - Where is the battery of the Audi Q5? Read Answer
    • Q5 2017-2025 - Where is the battery of the Audi Q5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos