Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Audi A6?

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Fuse box

All fuses in the Audi A6 are contained within dedicated fuse boxes installed in the vehicle: in this type of car, you can find three boxes. The first two are located inside the dashboard, on both sides accessible only by opening the front doors: the fuses in these two boxes control the operation of the courtesy lights, horn, infotainment, etc. The third box is located on the right side of the trunk: it contains the fuses that control the operation of the parking sensors, taillights, etc.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Audi A6 located?
Where are the fuses of the Audi A6 located?
Audi A6 (2011-2018 / C7, MK 4) The fuses of the Audi A6 are contained inside their respective fuse boxes that are installed on the vehicle: in this type of car, it is possible to i…
Where are the fuses located in the Audi A6?
Where are the fuses located in the Audi A6?
Audi A6 (2004-2012 / MK 3, C6) Any fuse of the Audi A6 is contained within one of the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be pos…
Where Are the Fuses Located in the Audi A6?
Where Are the Fuses Located in the Audi A6?
Audi A6 (2018-2026 / C8, MK 5) Each fuse in the Audi A6 is located inside one of the designated fuse boxes present in the vehicle: this type of vehicle has three fuse boxes. The fi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos