Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Fuses in an Audi A6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuse box

See other generations:
Video tutorial

To locate the fuses in an Audi A6, you need to find the various fuse boxes installed in the vehicle. The first box is located on the left side of the dashboard, accessible by opening the driver's door and removing the side panel.

A second group of fuses is found on the right side of the dashboard, behind the corresponding cover accessible by opening the passenger door. There is also a fuse box in the engine compartment, near the battery, primarily dedicated to high-power circuits.

On some versions, an additional panel is available in the trunk, on the right side, behind the side trim. To identify the position and function of each fuse, you can refer to the diagram on the covers of the boxes or the vehicle's owner's manual.

Before any inspection or replacement, it is advisable to turn off the ignition and remove the key.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

Fuse Box Audi A6
Fuse Box Audi A6
Audi A6 (1997-2004 / MK 2, C5) Locate the fuse box on an Audi A6. Lift the hood that covers the engine compartment, and remove the cover near the battery to access the fuses. Use n…
Where to Find and How to Access the Fuse Box of an Audi A6?
Audi A6 (2004-2012 / C6, MK 3) Hello, today you will learn how to locate and access the fuse box of your Audi A6. First, carefully open the hood using the release lever. Once opene…
Where to Find the Fuse Box of the Audi A6 C7
Where to Find the Fuse Box of the Audi A6 C7
Audi A6 (2011-2018 / C7, MK 4) In this new guide for all Audi A6 C7 owners, discover where the fuse box containing all the car's fuses is located. By following this procedure, you …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos