Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part:

In this tutorial we can see how to reset the tire pressure light in the Audi A3, a very simple and quick operation. Before proceeding, we must have restored the correct pressure of each tire following the instructions in the manual. Let's start by going inside the car, then insert the key and turn on the instrument panel, there is no need to start the engine. Next, we locate the button depicting both the light to be reset and the word "SET", hold it down and wait for the light to be completely reset. Restart the vehicle afterwards.

Posted on 4 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on an Audi A3?
How to Reset the Tyre Warning Light on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, you will see how to reset the tyre warning light on an Audi A3, a very simple and quick operation. Before proceeding, ensure you ha…
How to Reset the Tyre Light on an Audi A3?
How to Reset the Tyre Light on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, you will learn how to reset the tyre light on an Audi A3, a very simple and quick operation to perform only after restoring the cor…
How to Reset the Tyre Pressure Light on a 2015 Audi A3
How to Reset the Tyre Pressure Light on a 2015 Audi A3
Audi A3 (2012-2019 / 8V, MK 3) If you own a 2015 Audi A3 and want to learn how to manually reset the tyre pressure light that appears on the dashboard, follow the steps below. Firs…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos