Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Panel of the Rear Hatch of the Audi Q5?

Model: Audi Q5 MK 2, 80A - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the inner panel of the rear hatch of the Audi Q5, open the hatch to access its interior covering. Using a prying tool, detach all the trim pieces at the top of the panel so that the screws underneath are accessible.

By removing these screws, you can now use a tool to pry and release the internal clips that secure the panel to the hatch. This will allow you to insert the new panel into its place, attaching it to the pins and securing it with the screws.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to remove the rear hatch panel of the Audi Q5.
How to remove the rear hatch panel of the Audi Q5.
Audi Q5 (2008-2017 / MK 1, 8R) Below we will see the instructions that will allow us to disassemble and remove the interior panel of the rear hatch of the Audi Q5. First, let's ope…
How to Remove the Front Passenger Door Panel of the Audi Q5 8R
How to Remove the Front Passenger Door Panel of the Audi Q5 8R
Audi Q5 (2008-2017 / MK 1, 8R) This guide shows how to remove the inner door panel of the right front door of the Audi Q5 8R. Remove the trim panel of the door using a trim removal…
Guide to Repairing the Sunroof of the Audi Q5
Guide to Repairing the Sunroof of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, you will find the main instructions for repairing the sunroof and shade of the Audi Q5. First, get inside the vehicle and start removi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos