Do it yourself
Frequently asked questions about cars and motorcycles

How to change the battery of an Audi A4 key?

Model: Audi A4 B9 - Years 2014-2024
Part: Key

To change the battery of an Audi A4 key, you can follow some simple steps. First, locate the slot or opening point on the side of the Audi A4 key. Use a flathead screwdriver or similar object to gently open the key. Once opened, you will find the battery inside. Carefully remove the exhausted battery using a small screwdriver or similar object to pop it out of its housing. Make sure to note the orientation of the battery so that you can correctly insert the new battery. Insert the new battery in the same orientation as the previous battery, making sure it is securely placed in its housing. Close the key carefully, ensuring all parts fit together properly. Once closed, try pressing the key buttons to verify they are functioning correctly. If the key responds properly, you have successfully completed the battery replacement.

Posted on 19 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2014-2024 / B9) Today we will see how to change the battery (CR2032) of the key of an Audi A4 B9 model. Let's start the operation by removing the physical key from t…
Audi A4 (2014-2024 / B9) Start by pressing and holding the button located on the back of the key fob for your Audi A4 to extract the physical key. Once you have removed the p…
Audi A4 (2007-2016 / B8) Before you can begin, press the button located on the upper section of the key for your Audi A4 to extract and remove the physical key from inside th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos