Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the door panel of the Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Door trim panel

These simple steps will show us how to disassemble and replace the front door panel of the Audi A4. First, we open the front door and start removing the plastic cover located under the opening handle; then we unscrew the fixing screws found underneath, as shown in the video. At this point, we unscrew the additional screws of the door panel, levering on the sides to detach and remove it; finally, we disconnect the handle cable and the electric connector of the window switch. Apply the reverse process for reassembly!

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the door panel of the Audi A4?
How do you remove the door panel of the Audi A4?
Audi A4 (2007-2016 / B8) The operation of removing the door panel of the Audi A4 is done by detaching the moldings on the top and middle part of the panel: once these have be…
How do you replace the door lock of the Audi A4?
How do you replace the door lock of the Audi A4?
Audi A4 (2007-2016 / B8) In order to replace the door lock of the Audi A4, you need to pry with an object so that the trims on the top and middle part of the door panel can b…
How do you remove the door panel of the Audi A4?
How do you remove the door panel of the Audi A4?
Audi A4 (2000-2004 / B6) The removal of the door panel of the Audi A4 is done by levering with an object, in order to detach the trim at the top of the panel: once this has b…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos