Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How to open the key remote of the Audi A4

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Key
Operation: How to open the key remote of the Audi A4

Today we will see the instructions that will allow us to open the key remote of the Audi A4, in simple and quick steps. First of all, we take our remote control and start removing the physical key from inside it; then we lever on the sides to open it, accessing the electronic board and the battery, as shown in the video. At this point, we clean the components if necessary or replace the key shell; replace the battery if necessary and finally assemble the remote control, checking that the commands work properly!


Posted on 2 May 2024 by ScegliAuto

    Frequently Asked Questions

    • A4 2004-2008 - Why is the Audi A4 remote control not working? Read Answer
    • A4 2000-2004 - What does it mean if the Audi A4 remote control no longer works? Read Answer
    • A4 2004-2008 - Why does the Audi A4 key not work? Read Answer
    • A4 2014-2023 - Why does the remote control no longer work in the Audi A4? Read Answer
    • A4 2004-2008 - Why does the Audi A4 remote control not work? Read Answer
    • A4 2007-2016 - Why does the central locking of the Audi A4 not work? Read Answer
    • A4 2004-2008 - How to unlock the tailgate of the Audi A4 if it does not open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos