Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the A1

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Tire pressure warning light

Today we will discover how to reset the tire pressure warning light (TPMS) of the Audi A1; before performing the reset, it is necessary that all four tires are at the correct pressure. First, we get into the car and go to the settings using the main command, through the display; then we go to the tire pressure option and select the reset, as shown in the video. At this point, make sure that the TPMS light has been permanently reset on the instrument panel, finally turning off the panel and starting the engine!

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Audi A1?
How do you reset the tire pressure warning light on the Audi A1?
Audi A1 (2010-2018 / MK 1, 8X) To reset the tire pressure warning light of the Audi A1, you need to inflate the tires until they reach the recommended pressure value: this value wi…
How to reset the tire warning light on the Audi A1?
How to reset the tire warning light on the Audi A1?
Audi A1 (2018-2025 / GB, MK 2) In this tutorial, we will see how to reset the tire warning light in the Audi A1, an extremely simple and quick operation to be performed only after …
Tire pressure reset on Audi A1
Tire pressure reset on Audi A1
Audi A1 (2010-2018 / MK 1, 8X) Through this guide today, we can see the necessary procedure to reset the tire pressure warning light on a first-generation Audi A1, produced from 20…

Other guides you may be interested in

How to Remove the Front Headlight on Audi A4

How do you remove the front headlight on an Audi A4? Follow this detailed guide: Pull the plastic lever located at the bottom left of the dashboard, then lift the hood and secure it. Get a socket wrench (with the appropriate inserts), remove the top part of the bumper cover, then unscrew the screws around the front headlight. Disconnect the power connectors and replace the damaged bulbs (same size and voltage). To reassemble, proceed in reverse. Finally, test the proper operation of the lights.

Watch the video!


by ScegliAuto

More videos