Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Audi A1?

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure warning light of the Audi A1, you need to inflate the tires until they reach the recommended pressure value: this value will be indicated on the sticker that is glued to the driver's side door pillar. Once all the tires have been inflated, you can locate the SET button located at the bottom of the central dashboard panel: you will need to hold it down for a few seconds, noticing that the low pressure warning light will first start flashing and then turn off completely.


Posted on 21 June 2025 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on the Audi A1?
How do you reset the tire pressure warning light on the Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) To completely remove the tire pressure warning light displayed on the instrument panel of the Audi A1, you will need to insert the key and turn on th…
How to reset the tyre pressure warning light on the Audi A1?
How to reset the tyre pressure warning light on the Audi A1?
Audi A1 (2018-2025 / MK 2, GB) The tyre pressure warning light that appears on the instrument cluster of the Audi A1 can be reset by inserting the key and turning on the ignition. …
How to reset the tire pressure sensor of an Audi A1?
How to reset the tire pressure sensor of an Audi A1?
Audi A1 (2018-2025 / MK 2, GB) To reset the tire pressure warning light on an Audi A1, turn on the instrument panel without starting the engine. Use the controls on the steering wh…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos