Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the AdBlue warning light in the Audi A7?

Model: Audi A7 MK 1 - Years 2010-2017
Part: AdBlue warning light

If the AdBlue warning light comes on in our Audi A7, it means that the anti-pollution system fluid has reached a too low level and, consequently, it will need to be topped up. This is a very simple operation, let's see how to proceed in this video. First of all, we buy a 10-liter can of urea, then we retrieve the tube key that can be used to replace a wheel, open the fuel door and unscrew the small cap. We then insert the can's tube into the hole, pour in the necessary amount of liquid, and drive a few kilometers.

Posted on 11 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the AdBlue Light on the Audi A7?
How to Remove the AdBlue Light on the Audi A7?
Audi A7 (2010-2017 / MK 1) If the AdBlue light is illuminated on the dashboard of your Audi A7, it means that the emissions fluid is at a too low level and needs to be refilled…
How to reset the tire warning light in the Audi S7?
How to reset the tire warning light in the Audi S7?
Audi A7 (2010-2017 / MK 1) In this tutorial, you will see how to reset the tire warning light in the Audi S7, a very simple and quick operation to perform only after restoring …
How to reset the oil light on the 2018 Audi A7
How to reset the oil light on the 2018 Audi A7
Audi A7 (2018-2025 / MK 2) In this new guide of ours, we will discover together the steps you need to take in order to manually reset the service light of your Audi A7 second s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos