Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Audi TT?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Service warning light

In order to reset the Service light of the Audi TT, you need to press and hold the button located at the bottom of the instrument panel, to the right of the screen in the center of the panel: while holding down the button, you will need to insert the ignition key into the ignition block so that you can turn it to start the instrument panel. Once this is turned on, you can release that button and press the one on the left of the screen instead: now you will notice that the Service light has disappeared and you can then turn off the instrument panel.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Audi TT?
How to Reset the Service Light on the Audi TT?
Audi Tt (2006-2014 / MK 2, 8J) You can clear the Service light from the instrument cluster of the Audi TT by turning on the ignition and inserting the key into the ignition switch:…
How to reset the "Service" indicator on an Audi TT?
How to reset the "Service" indicator on an Audi TT?
Audi Tt (2014-2023 / MK 3, 8S) To reset the "Service" light on an Audi TT, turn on the instrument panel without starting the engine. Use the controls on the steering wheel to acces…
How do you reset the Service light on the Audi TT?
How do you reset the Service light on the Audi TT?
Audi Tt (2014-2023 / MK 3, 8S) It will be possible to reset the Service light on the instrument panel of the Audi TT by turning on the instrument panel after inserting the ignition…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos