Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glass of the Audi A6 Exterior Rearview Mirror

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

See other generations:
Video tutorial

Today, follow the step-by-step instructions on how to remove and replace the exterior rearview mirror glass of the Audi A6. First, open the front door and turn on the ignition, using the electric adjustment of the mirror glass to direct it towards you. From the created angle, gently pry to detach the glass from the supports, disconnecting the electrical connector located at the back, as shown in the video.

At this point, install the new mirror glass, securing it properly to the support; finally, adjust it!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to replace the cover of the external rearview mirror of the Audi A6
How to replace the cover of the external rearview mirror of the Audi A6
Audi A6 (2011-2018 / C7, MK 4) Today we will see the steps that will allow us to disassemble and replace the plastic cover of the external rearview mirror of the Audi A6. First of …
How to Replace the Outside Rearview Mirror on an Audi A6?
How to Replace the Outside Rearview Mirror on an Audi A6?
Audi A6 (2011-2018 / C7, MK 4) The procedure to replace the mirror on the Audi A6 involves prying off the glass from inside its housing with a tool: once this part is removed, you …
Replacing the Side Mirror Glass
Replacing the Side Mirror Glass
Audi A6 (2004-2012 / C6, MK 3) Replacing the side mirror glass is very simple since it is attached to the support only through plastic tabs. It is also easy to find a replacement i…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos