Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on an Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Tail light bulb

How do you replace a rear headlight bulb on an Audi A3? Let's see how to proceed in this video. This is a very simple operation; open the boot and carefully remove the plastic cover from the side trim. Unscrew the retaining pins of the lamp using a socket wrench with the appropriate socket, then extract the headlight using your hands from the car's bodywork. Disconnect the power connectors. Once the rear headlight is removed, replace the damaged bulbs with new ones. After completing this operation, reassemble everything in reverse order. Finally, check the correct functioning of the lights.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Light Bulb on an Audi A3
How to Replace the Rear Brake Light Bulb on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) To replace the brake light bulb of the rear lamp, you must first remove the lamp: once the rear bonnet is opened, locate the caps on the inner lining…
How to replace the rear headlight bulb of the Audi A3
How to replace the rear headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the rear headlight bulb of an Audi A3 MK2 model car. First, open the trunk of the car and then remove the side a…
How to remove the rear light of the Audi A3.
How to remove the rear light of the Audi A3.
Audi A3 (2012-2019 / MK 3, 8V) The steps to remove the rear light of an Audi A3 8V model vehicle are as follows: - open the trunk; - remove the side cover; - unscrew the two Torx s…

Other guides you may be interested in

How to Clean the Injectors on BMW 3 Series

Let's see how to clean the injectors on BMW 3 Series with the appropriate cleaning kit. Lift the hood and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors. Connect the pressure gauge and the cleaning kit to the fuel lines; start running the cleaning fluid from the previously connected kit through the fuel lines of the injectors (repeat this process several times). Disconnect everything and start the engine. Reinstall the fuel line leading to the injectors after cleaning them of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos