Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal bulb of the Audi A3 mirror

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Side marker bulb

Today's procedure will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Audi A3. First, let's move to the side of the car and start by removing the mirror glass, disconnecting the small connector at the back; then remove the plastic cover of the mirror, and then remove the turn signal light, as shown in the video. At this point, replace only the bulb or the entire turn signal light, installing the new one; check its operation before reassembling everything, following the reverse procedure!

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the External Wing Mirror of an Audi A3
Replacing the External Wing Mirror of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the external wing mirror (passenger side) of an Audi A3? Follow these steps. Using a plastic or rubber lever, pry between the peri…
How do you replace the interior rearview mirror of the Audi A3?
How do you replace the interior rearview mirror of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To replace the interior rearview mirror of the Audi A3, you need to pry with an object in order to detach the internal fastening clips that hold the …
How to remove the outer cover of the mirror of an Audi A3
How to remove the outer cover of the mirror of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Removing the cover of the external rearview mirror of an Audi A3 vehicle is a simple and quick operation that can be easily done independently, also …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos