Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Benelli TRK 502, start by turning on the engine for a few minutes to warm up the oil, making it more fluid and facilitating drainage. Turn off the engine and lift the bike using a center stand to ensure stability. Locate the oil drain plug, usually located on the bottom of the engine. Place a collection tray under the plug and use a wrench to loosen and remove the plug, allowing the old oil to drain completely. After all the oil has drained, screw the drain plug back in and make sure it is tight. Find the oil fill cap, located on the side of the engine, and remove it. Use a funnel to carefully pour the recommended amount of new oil from the user manual. After adding the oil, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for leaks. Make sure the oil level is correct and everything is functioning properly.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Change on a Benelli TRK 502
Engine Oil Change on a Benelli TRK 502
Trk 502 Today, follow these instructions to change the engine oil on a Benelli TRK 502. First, remove the old oil: unscrew the oil drain plug located on the …
How to Perform an Oil Change on a Benelli TRK 502
How to Perform an Oil Change on a Benelli TRK 502
Trk 502 Let’s go through the procedure for performing routine maintenance by changing the engine oil and oil filter on a Benelli TRK 502. First, place the mo…
How to change the motor oil of a Benelli TRK 502?
How to change the motor oil of a Benelli TRK 502?
Trk 502 To change the motor oil of a Benelli TRK 502, start by making sure you have the correct oil and a container to collect the used oil. Park the motorcy…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos