Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for Benelli TNT 135

Model: Benelli Tnt 135
Part: Engine oil

Video tutorial

In this guide, you will learn how to replace the engine oil and oil filter on a Benelli TNT 135 4T. Obtain two litres of Motul 4T 5100 10W40 oil and a K&N-112 oil filter. Position the motorcycle on a stand.

Place a wide container under the engine to collect the used oil. Using a ratchet and a 13mm socket, remove the oil drain plug located at the bottom, on the left side of the engine. Clean the cylindrical filter of the plug thoroughly and let all the engine oil drain out. In the meantime, replace the oil filter located on the right side of the engine.

To replace it, unscrew the three 8mm bolts from the round cover, taking care not to lose the spring. Insert the new filter with the hole facing the engine and reassemble.

Screw the oil drain plug back in place with the filter in the correct position until tight. Now open the oil filler neck located on the right side of the engine.

Add SAE 10W40 oil, referring to the level inspection hole located at the bottom of the crankcase.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Changing Engine Oil and Oil Filter on a Benelli TNT 135
Changing Engine Oil and Oil Filter on a Benelli TNT 135
Tnt 135 In this tutorial, you will learn how to change the engine oil and oil filter on a Benelli TNT 135 motorcycle by following these simple steps. First, …
How to replace the motor oil in the Benelli TNT 135?
Tnt 135 In this tutorial, we can see how to replace the motor oil in the Benelli TNT 135, a very simple and quick operation. First of all, make sure that the…
How to Change the Engine Oil in the Benelli TNT 135
How to Change the Engine Oil in the Benelli TNT 135
Tnt 135 In this tutorial, we will see how to change the engine oil in the Benelli TNT 135, a very simple and quick operation. First, ensure the engine is coo…

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?

In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key but keep it in the initial position, then press and hold the "SET" button located at the bottom right of the dashboard, and simultaneously turn on the instrument panel. At this point, hold the button for about 3 seconds, or for as long as necessary for the service to reset correctly.

Watch the video!


by ScegliAuto

More videos