Fitting Fog Lights on Benelli TRK 502 (With video)

Do it yourself

Frequently asked questions about cars and motorcycles

Car tutorial (Do it yourself)

Motorcycle tutorial (Do it yourself)

Frequently Asked Questions

Model: Benelli Trk 502
Part: Headlight

Extend the four wires of the fog lights by approximately 55 cm, secure the lights where desired, and attach the switch to the handlebars at your preferred location. Remove the seat to access the battery, run the wires internally, and bring them out on the left side of the bike. Using a piggyback connector, connect a piece of grey wire to the positive of the lights. Run the black and grey wires under the tank and connect them to the battery. Connect one wire from the switch to pin 85 of the relay, and connect the other wire to the negatives of the fog lights, then connect them all to the negative of the battery. The wire connected to the positive of the lights should go to pin 86 of the relay, while the two positives of the fog lights will go to pin 87. Finally, the positive grey wire coming from the battery goes to pin 30 of the relay. Attach the fuse holder to this wire and connect the positive and negative to the battery.

Updated on 30 March 2026 by ScegliAuto

This video is currently unavailable

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!

by ScegliAuto

Related tutorials

How to Replace the Battery in a Yamaha Vino 125 Scooter?

More videos