Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of a Benelli Imperiale 400?

Model: Benelli Imperiale 400
Part: Wheel

Video tutorial

To remove the rear wheel of a Benelli Imperiale, first loosen the nuts that secure the axle connecting the wheel to the swingarm. Next, disconnect the brake cables and loosen the bolts securing the brake caliper to its disc, removing the caliper.

Now, loosen the nuts on the chain adjuster and slide the chain off the sprocket on the wheel. This will allow the wheel to be removed, and you can also replace the spacer on it. Once the spacer is installed on the new wheel, mount it by reversing the previous steps.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of the Benelli Imperiale 400
How to Remove the Front Wheel of the Benelli Imperiale 400
Imperiale 400 In this brief guide, learn how to remove the front wheel and possibly the tyre of the Benelli Imperiale 400 motorcycle. First, place your motorcycle …
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
Imperiale 400 To replace the rear brake pads on the Benelli Imperiale 400, loosen the screws that secure the brake caliper to the corresponding disc: once these sc…
How to Replace the Rear Brake Pads on a Benelli Imperiale 400?
How to Replace the Rear Brake Pads on a Benelli Imperiale 400?
Imperiale 400 To replace the rear brake pads on a Benelli Imperiale 400, loosen the bolts that secure the brake caliper to the brake disc. Once the bolts are loose…

How to Set the Clock on a Yamaha NMAX 125 Scooter?

In this tutorial, you will learn how to set the clock on a Yamaha NMAX 125 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and press and hold the "MODE" button on the left control until the clock starts to flash. Next, adjust the hour by pressing the button quickly, hold it down to switch to minutes, and similarly adjust them before finally saving the setting.

Watch the video!


by ScegliAuto

More videos