Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel of the Benelli Imperiale 400

Model: Benelli Imperiale 400
Part: Wheel

Video tutorial

In this brief guide, learn how to remove the front wheel and possibly the tyre of the Benelli Imperiale 400 motorcycle. First, place your motorcycle on the centre stand and lift the front wheel off the ground; then, unscrew the central axle nut using a socket or star spanner, as shown in the video.

At this point, remove the wheel from the axle and, if necessary, replace the tyre; reinstall the wheel and refit the front brake caliper onto the disc, following the video tutorial to the end!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of a Benelli Imperiale 400?
How to Remove the Rear Wheel of a Benelli Imperiale 400?
Imperiale 400 To remove the rear wheel of a Benelli Imperiale, first loosen the nuts that secure the axle connecting the wheel to the swingarm. Next, disconnect th…
How do you replace the rear shock absorber of the Benelli Imperiale 400?
How do you replace the rear shock absorber of the Benelli Imperiale 400?
Imperiale 400 To replace the rear shock absorber of the Benelli Imperiale 400, you will need to loosen the screws that secure the component to its housing: this wi…
How to Replace the Air Filter of the Benelli Imperiale 400?
How to Replace the Air Filter of the Benelli Imperiale 400?
Imperiale 400 To replace the air filter of the Benelli Imperiale 400, loosen the screws securing the cover on the left side of the bike, just below the fuel tank. …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos